POTENTIOMETER FOOT PEDALS (L- AND M-SERIES)
The L- and M-Series foot controls provide a variable resistance output and can also include a switch. These foot pedals can be used to vary the speed of motors when used with variable-speed motor drives and can also be used for other electronics applications. Contact the manufacturer of the equipment to see what resistance value, power requirement, and other specifications are required for your application.There are two versions available: the L-Series, which has a spring-loaded momentary action (press to activate or adjust, release to return upright), and the M-Series, which has a maintained action (stays in place once you set it until further adjustment). The L-Series are ideal for applications such as lift tables, pipe rollers, or electric golf cart motors. A switch can also be added to the circuitry (add "-S" to the end of the part number). The M-Series are ideal for pottery wheel foot pedals, adjusting the output level of music equipment, and other applications. The G700-Series (below) provides an additional heavy-duty construction and higher enclosure rating.
L and M Potentiometer Foot Controlsfoot switch safety warning
|L1000||momentary||1,000 ohm, 2 watt||8-foot cable with leads||$88.90||
|L5000||momentary||5,000 ohm, 2 watt||8-foot cable with leads||$88.90|
|L10000||momentary||10,000 ohm, 2 watt||8-foot cable with leads||$88.90|
|L25000||momentary||25,000 ohm, 2 watt||8-foot cable with leads||$88.90|
|M1000||maintained||1,000 ohm, 2 watt||8-foot cable with leads||$96.90|
|M5000||maintained||5,000 ohm, 2 watt||8-foot cable with leads||$96.90|
|M10000||maintained||10,000 ohm, 2 watt||8-foot cable with leads||$96.90|
|M25000||maintained||25,000 ohm, 2 watt||8-foot cable with leads||$96.90|
*A UPS Ground shipping charge will be added to your total. For international shipments, duties and/ or fees may apply.
Optional Features (add to end of any model number above to order):
|Option||Part No.||Description||Image||Info Sheet||Price|
|-S||Switch||Switch (activates at beginning of pedal motion). Switch circuit is rated for extra low voltage (ELV) control circuits only (circuits that are electrically isolated from the main line). Available on L-Series only.||n/a||info sheet||add $20|
|-G||Guard||Heavy Duty 12-Gauge Steel Guard - Adds protection from debris
and provides a secure location in which to position the foot.
Includes non-skid base pad and four optional mounting holes.
NOTE: This is a build-to-order item and may require a 2-3 day lead time.
Size: 9.2" L x 8.2" W x 8.1" H; 10.7 pounds
info sheet (with guard)
exterior dimensions (guard)
Please call 1-440-205-1600 to order a foot control with an optional feature (not available online).
POTENTIOMETER FOOT PEDALS (G700-SERIES)
The G700 are potentiometer foot controls with the heavy-duty construction of the G-Series. Available with or without a switch. The switch is set to activate at the beginning of the pedal cycle and has an adjustable activation point. These units have a NEMA Enclosure Type 2, 4, and 13 rating (IEC rating: IP56) and therefore are suitable for indoor/outdoor, hose-down, and other heavy-duty environments, when properly connected. Please read the foot switch safety warning before purchasing any foot control.
|G700-1K||momentary||1,000 ohm, 1/4 watt||not applicable||$109.00||
info sheet and wiring diagram
potentiometer specs (49kb)
|G700-5K||momentary||5,000 ohm, 1/4 watt||not applicable||$109.00|
|G700-10K||momentary||10,000 ohm, 1/4 watt||not applicable||$109.00|
|G700-1K-S||momentary||1,000 ohm, 1/4 watt||20 A, 125/250 VAC||$129.00|
|G700-5K-S||momentary||5,000 ohm, 1/4 watt||20 A, 125/250 VAC||$129.00|
|G700-10K-S||momentary||10,000 ohm, 1/4 watt||20 A, 125/250 VAC||$129.00|
NOTE: The G700 cannot be used with the standard G-Series "-HA" handle option.