DF-Series Dual Pedal Foot Switch Models
|
Info Sheet |
Model | Action* | Electrical Rating, Each Side | Circuit | Cable | Price |
|
|
DF200 | dual foot switch, momentary | 15 A, ½ HP, 125/250 VAC; 0.1 A, 125 VDC | SPDT each side with quick-connect tabs (.187 x .020) for terminals or soldering | none | $89.00 |
| DF200-1302 | dual foot switch, momentary | 13 A, ½ HP, 125/250 VAC; 0.1 A, 125 VDC | comes pre-wired normally open with 16-gauge, 4-conductor cable | 8 ft | $125.60 | |
| DF202 | dual foot switch, momentary | 15 A, ½ HP, 125/250 VAC; 0.1 A, 125 VDC | DPDT each side with quick-connect tabs (.187 x .020) for terminals or soldering | none | $105.60 | |
| DF300 | dual foot switch, maintained | 20 A, 125 VAC; 10 A, 250 VAC; 1.5 HP, 125/250 VAC | SPST with wire leads inside foot switch for connection to cable | none | $114.50 | |
| DF500 | dual foot switch, momentary | 20 A, 125/250 VAC; 1 HP, 125 VAC; 2 HP, 250 VAC | SPDT each side with screw terminals | none | $103.60 | |
| New! Build Your Own Dual-Pedal F-Series You can build your own combination of two F-Series foot switch models onto a single steel platform, with or without a guard. Any single F-Series foot switch model can be used on either the left or right side. | ||||||
*Momentary Action: Press and hold to turn on, release to turn off (like a car horn). Maintained Action: Press once to turn on, press again to turn off (like a light switch).
Guard Options
|
Image |
Option | Part No. | Price | Info Sheet |
 |
Adds a durable 12-gauge steel guard with rubber bumper feet. Model number DF200-DG is shown in the picture. Add -DG to the end of the model number to order. Note: The divider between the foot switches is not included when the dual guard is added. If you need the divider, please call us as this is a special option that adds $20. | -DG | Add $35.00 to the above. For models not listed above, add $35 to the cost of any two single F-Series units using the "Build Your Own" link above. | Info Sheet |
