Description
The G500-AT-1502 foot switch features the tough heavy-duty construction of the G-Series foot switches and comes pre-wired with an eight-foot cable with leads on the end of it so you can wire this to your device.
This foot switch has an anti-trip pedal action, meaning the user must press forward a latch inside the hood before pressing down on the pedal to turn it on, which provides an additional measure of safety by reducing accidental activation. These units then have a momentary action; the user must keep the pedal pressed down in order to keep it on.
Features tough die-cast aluminum construction, an oversized guard (5.5” high, 6.2″ wide) with enough room to fit large boots, and an oil/water/splash/dust-resistant enclosure. Side cover flaps help protect pedal lever and shaft from oil, solvents, and water. Size: 9.2″ L x 6.2″ W x 5.5″ H (not including cable). CSA Enclosure Type 2, 4, & 13. IEC 60529 IP56. Certified to CSA and UL standards.
- Pedal Action: anti-trip
- Rating: 15 A, 125/250 VAC
- Cable and Connection: 8-foot cable with leads
- Info Sheet (G-Series Foot Switches, Anti-Trip, with Cable)
- Foot Switch with Cable – Wiring Diagram
- Cross Reference: Hercules 511-B, 511-BO, 511-BOX
